Universal proximity feed sensor. Push button settings. Does not include mounting grommet.
OPERATING VOLTAGE: 24 Volts to 240 Volts AC or DC
FREQUENCY: 45 Hz to 65 Hz
MAXIMUM LOAD CURRENT: 0.2 Amps AC or DC
CONTACTS: N.C. – Normally Closed – (Brown and Red Wires) N.O. – Normally Open – (Brown and Orange Wires) NOTE: Any wire not used must be taped for protection.
CORD: 18 AWG, 3 Conductor, Type TC, Length – 6′
SENSING DISTANCE ADJUSTMENT: Sensitivity AP-2983 Factory Setting 4 (Range 1 to 6)
TIME DELAY RANGE: 0 Seconds to 3 Hours in 1 minute increments
ADJUSTMENT METHOD: “Min” push button and “Hr” push button
INDICATOR LIGHTS: Red LED On – Program Mode Yellow LED On – Product Detected Green LED Flash – Delay before Relay is Activated Green LED On – Relay Activated
INSTALLATION: Rubber mounting grommet (AP-1004) with cable tie to secure sensor to grommet. NOTE: Do not use hose clamp. 1-7/16″ Diameter hole required for grommet. Insert sensor through grommet up to “GROMMET INSERTION LINE”.
